Before operating this product, please read the instructions carefully and save this manual for future use.Installation Instructions providedOperating
10How to install and connect the unit(continued)4 Mount the unit. Align the position of the hole for checking the positioning with the status displ
11Installation InstructionsHow to install and connect the unit(continued)6 Connect the rear panel connectors.Anchor the AC adaptor cable in place usi
12How to install and connect the unit(continued) When using the WV-Q105 (optional accessory)It is recommended that you provide an inspection openin
13Installation Instructions Changing the direction of the nameplateWhen the unit is mounted on the ceiling, its nameplate will be upside down.The dir
14 Removing the camera1 Turn off the circuit breaker and power.2 Remove the cable cover. Remove the screw (M3) for the cable cover used to secur
15Installation Instructions Stand-alone installation (when the mount bracket is going to be used)The same steps are followed as for the kind of instal
16 Stand-alone installation (when the mount bracket is going to be used)(continued)5 Check the mounting.6 Connect the rear panel connectors. Coaxial
17Installation Instructions Stand-alone installation (when the mount bracket is not going to be used) When installing the unit on a desktopPlace the
18 Connections Connections with an HD monitorHD monitorHDMI signal, HD-SDI signal or HD analog component signalHD Integrated Camera AW-HE120 Wirele
19Installation InstructionsConnections(continued) Connections with a controller ( AW-RP655 or AW-RP555) LAN cable (straight cable)Pan-tilt head/ca
2ENGLISH How to open the operating instruction manual PDF filesDiscontinue installation if the installation screen of the software opens as a result
20Connections(continued) System example 1 (Serial control)Accessory AC adaptorRS-422 connectorHD Integrated Camera AW-HE120HD Integrated Camera*AW-H
21Installation Instructions Connections(continued) System example 2 (IP control)Accessory AC adaptorLAN connectorHD Integrated Camera AW-HE120HD Int
22 AppearanceUnit: mm (inch)R90(R3-17/32)180 (7-3/32)125 (4-29/32)90 (3-17/32) 108 (4-1/4)220 (8-21/32)3 (1/8) 53 (2-3/32)175 (6-7/8)225 (8-27/32)
23Before useOperating Instructions indicates safety information.CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
24 indicates safety information.This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) This devic
25Before useOperating Instructions indicates safety information.WARNING:This equipment must be earthed.To ensure safe operation, the three-pin plug mu
26EMC NOTICE FOR THE PURCHASER/USER OF THE APPARATUS1. Applicable standards and operating environment The apparatus is compliant with: • standard
27Before useOperating InstructionsFOR U.K. ONLYThis appliance is supplied with a moulded three pin mains plug for your safety and convenience.A 13 amp
28 Before use Overview This unit is a full HD camera integrated with a pan-tilt head and featuring a newly developed 1/3-type full HD 3MOS sensor
29Before useOperating InstructionsBefore use(continued)IMPORTANT Failure to provide the required personal computer environment may slow down the del
3Trademarks and registered trademarks Microsoft, Windows, Windows Vista, Windows 7 and Internet Explorer are either registered trademarks or tradema
30 CharacteristicsMultiple number of formats supported In terms of the SDI and analog component output signals, the format — whether 1080/59.94i, 10
31Before useOperating Instructions Controller supported AW-RP655 AW-RP555 AW-RP50 It may be necessary to upgrade the version of the contro
32 Operating precautionsShoot under the proper lighting conditions.To produce pictures with eye-pleasing colors, shoot under the proper lighting condi
33Before useOperating InstructionsOperating precautions(continued)Turn off the power before connecting or disconnecting the cables.Always be sure to t
34 Concerning the wireless remote control (optional accessory)This unit can be operated by remote control using a wireless remote control (model numb
35Parts and their functionsOperating Instructions Parts and their functions Camera unit<Rear panel><Bottom panel> Mount bracket for i
36Parts and their functions(continued) LAN connector for IP control [LAN ACT/LINK]This LAN connector (RJ45) is connected when exercising IP control o
37Parts and their functionsOperating InstructionsParts and their functions(continued) Wireless remote controller(optional accessory) ON/STANDBY b
38Parts and their functions(continued)Furthermore, the pan and tilt movement range limits (limiters) are set and released by operating the PRESET/LIMI
39PreparationOperating Instructions Setting the remote control IDsThe wireless remote control (optional accessory) is capable of operating up to four
4ContentsInstallation InstructionsOperating InstructionsRead this first! ...5Installati
40 Network settings Installing the softwareBe absolutely sure to read through the “Readme.txt” on the CD-ROM supplied with the unit first before att
41PreparationOperating InstructionsNetwork settings(continued)1 Start the Easy IP Setup Software.2 Click the MAC address/ IP address of the camera
42 TroubleshootingOperationSymptom Cause and remedial actionReference pagesNo power Is the AC adaptor securely connected to the AC outlet? ––– I
43ReferenceOperating InstructionsSymptom Cause and remedial actionReference pagesThe adjustment of the slowest speed at which the camera is to start p
44Symptom Cause and remedial actionReference pagesThe web setting screen cannot be accessed Has the same IP address setting been used for another de
45ReferenceOperating InstructionsTroubleshooting(continued)VideoSymptom Cause and remedial actionReference pagesNo pictures are displayed or the pic
46Symptom Cause and remedial actionReference pagesSomething is wrong with the coloring of the pictures Activate the ATW (Auto tracking white adjustm
47ReferenceOperating InstructionsTroubleshooting(continued)Web settingsDepending on the OS installed on the PC, the following may occur. Follow the
48 SpecificationsPower requirements: DC 12 V(AC adaptor supplied)Current consumption: 1.75 A indicates safety information. GENERALAmbient operating
49ReferenceOperating InstructionsSpecifications(continued) FUNCTIONS AND PERFORMANCE[Camera unit]Imaging sensors: 1/3-type Full-HD 3MOSLens: Motor
5Installation Instructions indicates safety information.WARNING:To prevent injury, this apparatus must be securely attached to the floor/wall in accor
50 Index AAC Adapter (Option) ... 18, 19AC adaptor (Supplied) ...
51Memo
2011Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households)This symbol on the products and/or accompan
6 Installation precautionsTo installation personnelRead the Instructions thoroughly and then perform the operation correctly and safely.Also, always r
7Installation Instructions Installation precautions(continued)Before installation, always disconnect the power plugWhen installing, always use the sup
8 How to install and connect the unitBe absolutely sure to read through the “Read this first!” (page 5) and “Installation precautions” (pages 6 to 7).
9Installation InstructionsHow to install and connect the unit(continued)2 Mount the mount bracket onto the installation surface. Use the bracket
Comentários a estes Manuais